Product Introduction 1. Design speed:250m/min，glue roller:Φ320mm 2. Each of the glue rolls controlled by separate transducer motor to ensures all rollsrun with same pace, also run singly 3. Because each roll controlled by separate transducer, after the glue roller renewed also ensure the rolls run with same speed, by transducer adjustment, 4. The control of paste volume and accused of paste volumean be separated manuland automatic, 5. Manual controlling: Press the button that controls to adjust the clearance, to ensurepaste enough glue. 6. Auto-controlling: The coder and PLC auto-controls according to change of speed. And with inter-face appear control, to ensure glue when machine work in high orslow speed and the corrugated paper quality. 7. Stop machine, contact bar raise automatic, glue roller revolve automatically. 8. Press roller and elasticity pressure bar are optional.

Product Introduction 1. Diameter of pre-heater roller:Φ600mm、Φ900mm、Φ1000mm、Φ1100mm. 2. Effective width: 1400mm-2500mm 3. Electromotion heating angle adjustment. Adjustable range of 360°, Two angle shsft optionalincrease cngle area. 4. Surface of all rollers are well treated by grind and plated hard chrome, glabrous and durable. 5. Adopt dishing seal or plat design.Insurereel paper be heated averagely. 6. Simplex, duplex, triplex or quadplex preheater according to requirement.

Product Introduction 1. 360E Designed Speed: 200m/min; 320E Designed Speed: 180m/min 2. Effective Width: 1400-2200mm 3. Main Corrugated Roller:。360mm/1320mm 4. Negative pressure design, the core paper could be pressed evenly andattach to the surface of the corrugated roller, and guled evenly, make thecorrugated paper attach conditon better. 5. 10 minutes fast change corrugated rollers, When change corrugatedrollers use electric trolley to trailer into the machine, fixed on the pedestalof the machine, make it fast and easy to change corrugated rollers. 6. Corrugated roller and pressure roller adopt high stability air bag controlsystem. 7. Glue quantity adopt electric adjust, electric separate glue device, Whenthe main motor stop, the glue unit could operate independently to avoidthe glue use up. 8. Movable gluing system. Not only wash easily, but also more convenientto maintain. 9. Operating system is simple. Touch screen operating interface, withcolorful pictures display the operating state, it'S easy to operate. 10. Built-in preconditioner have mist spray system to adjust the temperatureand moisture of the core paper.

Product Introduction 1.320C Design Speed: 150m/min 2.Effective width: 1400mm -2200mm 3.Corrugated roller: Φ320mm 4.Drive reducer box with oil immersed type Ibricating to reduce noise keep runing stable, adopt gimbal transmission, separate power, (optional) 5.Corrugating rllr, pressure roller and glue roller by pneumatic adjustment. 6.Cardboard tansmit adopt vcum suction method, with wind control system, keep flute profiles stable of the lower-roller in the condition of running up. 7.Bearing of corugated and pressure roller adopt high temperature lubricate grease. 8.Glue parts auto supply glue circularly. 9.The uper-lower corugating rller are made of 48CrMo high qualty aly steel, after heat-treatment. The hardness is above HV1200,the surface be dealing with tungsten carbide. 10.The glue part surface are treated by special mesh snicked and chromeplated. 11 .Manud or electric insulation glue device. 12.Glue part can be running independently or non-independently while stopped.

Product Introduction 1. Maximum paper roll diameter: Φ1400mm; 2. Maximum support weight: 2T. 3. The sturcture is double rotary shaft with four arms;Supporttwo paper mill rolls on both arms at the same time. 4. Round-plate type manual brake, the web tension isadjusted at any time. 5. Arm Clamp and rotary structure set fixed torqueclutch, operate safety.

Product Introduction   1. The sturcture is double rotary shafts with four arms; Support twopaper mill rolls on both arms at the same time. 2. Hydraulic control for paper mill roller up-down, clamp-open andcentering. 3. Web tension is controlled by pneumatic brake or manual brake; Toothed chucks are optional. 4. Effective width: 1200mm-2800mm，Maximum paper rolldiameter: 1500mm。 5. Maximum support weight: V5B:2.5T，V6B:3.5T。 6. Main axis: Φ242mm/Φ270mm  

The drive reducer adopts oil immersion lubrication to reduce noise, universal joint transmission and isolate the power source (optional).