Product Introduction 1.Design speed: 200m/min,Sizing roll diameter 268mm 2. Special line on the surface of the glue applicator rollersrfaece ane hard chrome, palting, even glue supply, low cost. 3. The glue applicator drived by frequency conversion motor with inverter. Keep the synchronization for glue applicator roller and double baker facermachine by inverter. And independent running. 4. Electromotion adjustment display sizing amount or manual sdjustment sizing amount. 5. Press roll moves up and down by pneumatic. Gap mini-adjustment by electric. 6. Self-circulating glue supplying system to avoid glue hardenning and to control glue quantity Keeping the glue good quality and saving.

1.Design Speed:200m/min-250m/min，Effective width:1400mm —2500mm。 2.Cutting length:500mm-9000mm，cutting precision:±1mm(Running at steadyspeed)。 3. Memory of 180 orders, change cutting size quicky and accurately non-stop for changing orders and enables networked computers to facilitate production management 4. Cutter shaft rotary gear adpt forging steel high frequency quenching achieve no laterl, using advanced keyless cnnection, high precision. 5. Helical knives sttrucure wih HSS knife edge, serraton type knife and scissor cutting with less shear force, to keep the knives long life. 6. Front and behind feeding adopt sun wheel, smoothtransportation and uniform pressure, avoid damage paperboard. 7. Adjustable high precision non-gap gear to ensurecutting precision and running balance 8. Knife shaft made by quality forged steel material, andrunning stable after balance treatment. 9. Host base and machine frame adopt grey cast iron, to keep machine strong and stable 10. Adopt Germany KEB servo system and 10.4 inches Taiwan Eview color touch screen

1. Degsin speed:200m/min，250m/min. Width:1400mm-2500mm 2. Memory of 999 order, non-stop changeover or manual change over can be realized. 3. Slitler, crimping round single randomly servo control, single quickly, accurate. 4. Front two rovos of the preaure line wheel configurstion, sny combination of lie pressuring wheel to realise zero pressure line. 5. Automatic synchronize with the corrugaed line and can also get in line with manufacture management system. High compatibility. 6. High quality imported industry computer and PLC equipped composing the CNC system. 7. There are three types of scores: concave--convex(single wall), concave--convex(double wall) and convex-flat, which can also be alternated withelectrical system Scoring can also be computer controlled tith fine scoring results. 8. Thin tungsten steel alloy blade, sharp and long life of over 8 million meters. 9. Computer conrolled auto grinding and manual grinding also applicable. Altemative grinding the blade when slitting the board, it can increase efficiency. 10. Imported synchronous belt applied for conveying with higher precision, longer life and lower noise. 11. Standard waste, for a single location of absorb waste with the knife synchronous adjustment.

1.Design speed:200-250m/min，width:1800mm-2500mm 2. Man-machine interface PLC automatic control, automatic switching of the heating plate number and sizeof the pressure to adapt to different kind of paper flute peak intact 3. Heating plate is surface grinded and chrome-plated, Width 600mm.18-.22 pieces chose 4. Hot section adcpt hot plecte structure, according to the production of cardboard thickness, segmentedpneumatic pressure sdjustment(optional) 5. Upper cottonbelt with two-celt with two-cylinder s-type cotton belt tensioning device. Automatic or manual correctingdevice are optional. 6. Drive section adopt gear box, drived by electromagnetic speed control motor or frequency conversionmotor. 7. Driver rollers be covered endure abrasion rubber, and cutting "v"form teeth, with drum and put out pa-perboard stable.

Product Introduction 1. Design speed:250m/min，glue roller:Φ320mm 2. Each of the glue rolls controlled by separate transducer motor to ensures all rollsrun with same pace, also run singly 3. Because each roll controlled by separate transducer, after the glue roller renewed also ensure the rolls run with same speed, by transducer adjustment, 4. The control of paste volume and accused of paste volumean be separated manuland automatic, 5. Manual controlling: Press the button that controls to adjust the clearance, to ensurepaste enough glue. 6. Auto-controlling: The coder and PLC auto-controls according to change of speed. And with inter-face appear control, to ensure glue when machine work in high orslow speed and the corrugated paper quality. 7. Stop machine, contact bar raise automatic, glue roller revolve automatically. 8. Press roller and elasticity pressure bar are optional.

Product Introduction 1. Diameter of pre-heater roller:Φ600mm、Φ900mm、Φ1000mm、Φ1100mm. 2. Effective width: 1400mm-2500mm 3. Electromotion heating angle adjustment. Adjustable range of 360°, Two angle shsft optionalincrease cngle area. 4. Surface of all rollers are well treated by grind and plated hard chrome, glabrous and durable. 5. Adopt dishing seal or plat design.Insurereel paper be heated averagely. 6. Simplex, duplex, triplex or quadplex preheater according to requirement.

Product Introduction 1. 360E Designed Speed: 200m/min; 320E Designed Speed: 180m/min 2. Effective Width: 1400-2200mm 3. Main Corrugated Roller:。360mm/1320mm 4. Negative pressure design, the core paper could be pressed evenly andattach to the surface of the corrugated roller, and guled evenly, make thecorrugated paper attach conditon better. 5. 10 minutes fast change corrugated rollers, When change corrugatedrollers use electric trolley to trailer into the machine, fixed on the pedestalof the machine, make it fast and easy to change corrugated rollers. 6. Corrugated roller and pressure roller adopt high stability air bag controlsystem. 7. Glue quantity adopt electric adjust, electric separate glue device, Whenthe main motor stop, the glue unit could operate independently to avoidthe glue use up. 8. Movable gluing system. Not only wash easily, but also more convenientto maintain. 9. Operating system is simple. Touch screen operating interface, withcolorful pictures display the operating state, it'S easy to operate. 10. Built-in preconditioner have mist spray system to adjust the temperatureand moisture of the core paper.

Product Introduction 1.320C Design Speed: 150m/min 2.Effective width: 1400mm -2200mm 3.Corrugated roller: Φ320mm 4.Drive reducer box with oil immersed type Ibricating to reduce noise keep runing stable, adopt gimbal transmission, separate power, (optional) 5.Corrugating rllr, pressure roller and glue roller by pneumatic adjustment. 6.Cardboard tansmit adopt vcum suction method, with wind control system, keep flute profiles stable of the lower-roller in the condition of running up. 7.Bearing of corugated and pressure roller adopt high temperature lubricate grease. 8.Glue parts auto supply glue circularly. 9.The uper-lower corugating rller are made of 48CrMo high qualty aly steel, after heat-treatment. The hardness is above HV1200,the surface be dealing with tungsten carbide. 10.The glue part surface are treated by special mesh snicked and chromeplated. 11 .Manud or electric insulation glue device. 12.Glue part can be running independently or non-independently while stopped.

Product Introduction 1. Maximum paper roll diameter: Φ1400mm; 2. Maximum support weight: 2T. 3. The sturcture is double rotary shaft with four arms;Supporttwo paper mill rolls on both arms at the same time. 4. Round-plate type manual brake, the web tension isadjusted at any time. 5. Arm Clamp and rotary structure set fixed torqueclutch, operate safety.

Product Introduction   1. The sturcture is double rotary shafts with four arms; Support twopaper mill rolls on both arms at the same time. 2. Hydraulic control for paper mill roller up-down, clamp-open andcentering. 3. Web tension is controlled by pneumatic brake or manual brake; Toothed chucks are optional. 4. Effective width: 1200mm-2800mm，Maximum paper rolldiameter: 1500mm。 5. Maximum support weight: V5B:2.5T，V6B:3.5T。 6. Main axis: Φ242mm/Φ270mm